Uncategorized

2013 Latest Cisco 350-001 Exam Section 4: RF Troubleshooting (10

Ensurepass2013 Latest Cisco 350-001 Exam Section 4: RF Troubleshooting (10 Questions) QUESTION NO: 1 TestKing is using the WLSE to manage their Cisco wireless network. What network connectivity tools are available on the WLSE administration page? A. Ping and traceroute only B. SNMP reachable, Ping and Traceroute only C. Ping, Traceroute, and SNMP reachable only D. Ping, traceroute, nslookup, tcp port scan, SNMP reachable only E. Ping, Traceroute, L2 Traceroute, nslookup, and SNMP reachable Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 3: SWAN (9 Questions)

Ensurepass2013 Latest Cisco 350-001 Exam Section 3: SWAN (9 Questions) QUESTION NO: 1 The Testking network is performing site surveys at all of their location in order to plan for the installation of wireless networking devices. In terms of wireless networking, what are leading indicators of links with excessive occlusion (blockage with physical elements)? A. Coverage area less than 10 square meters at signals greater than-65 dBm B. Drips in RF signal in excess of 20 dBm over distances of less Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 2: Hardware (8 Questions)

Ensurepass2013 Latest Cisco 350-001 Exam Section 2: Hardware (8 Questions) QUESTION NO: 1 What device can function as a Wireless Domain Server capable of RF aggregation? A. BR1300 B. AP1200 C. WLSM D. AP1100 E. All of the above Answer: E Explanation: Cisco SWAN Wireless Domain Services (WDS) is a collection of Cisco IOS Software features that expand WLAN client mobility, simplify WLAN deployment and management, and enhance WLAN security. These services-supported today on access points, Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 1: Standards (8 Questions)

Ensurepass2013 Latest Cisco 350-001 Exam Section 1: Standards (8 Questions) QUESTION NO: 1 While troubleshooting some intermittent 802.11b wireless LAN problems, you use a protocol analyzer. While looking at the wireless LAN packets, which of the following should you find as part of the Frame Control Field? (Choose all that apply) A. Duration B. Power Management C. Order D. Wired Equivalent Privacy E. Retry F. More Fragment Answer: B, C, D, E, F Explanation: The IEEE 802.11b MAC Frame Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 4: Protocol Mechanics (10

Ensurepass2013 Latest Cisco 350-001 Exam Section 4: Protocol Mechanics (10 Questions) QUESTION NO: 1 What is the standard transport protocol and port used for SYSLOG messages? A. UDP 514 B. TCP 520 C. UDP 530 D. TCP 540 E. UDP 535 Answer: A Explanation: For a complete list of TCP/UDP well known port numbers, see the following link: http://www.iana.org/assignments/port-numbers UDP 514This port has been left open for use by the SYSLOG service. TCP and UDP Ports: In addition to the Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 4: Spoofing (3 Questions)

Ensurepass2013 Latest Cisco 350-001 Exam Section 4: Spoofing (3 Questions) QUESTION NO: 1 The Testking Network is displayed in the diagram below: You want to block all IP spoofing attacks that originate on the 192.168.1.0 network using a spoofed address outside the 192.168.1.0 range form being sent into the 192.168.2.0 network. However, all other traffic must be permitted. No access lists currently exist on the router. Which of the following configurations would accomplish this task when applied Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 3: Device Security/Access (10

Ensurepass2013 Latest Cisco 350-001 Exam Section 3: Device Security/Access (10 Questions) QUESTION NO: 1 What are the differences between TACACS+ and RADIUS? (Choose all that apply) A. TACACS+ uses UDP while RADIUS uses TCP for transport. B. RADIUS and TACACS+ encrypts the entire body of the packet. C. RADIUS is an IETF standard, while TACACS+ is not. D. TACACS+ sends a separate request for authorization, while RADIUS uses the same request for authentication and authorization. E. RADIUS offers Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 2: LAN Security (9

Ensurepass2013 Latest Cisco 350-001 Exam Section 2: LAN Security (9 Questions) QUESTION NO: 1 Private VLANs are set up in a Cisco switch for 3 ports as shown below: tamer (enable) show pvlan Primary Secondary Secondary-Type Port 500 501 community 5/37 500 502 isolated 5/38-39 tamer (enable) show pvlan mapping Port Primary Secondary 15/1 500 501-502 interface vlan 500 ip address 10.10.10.2 255.255.255.0 ip proxy-arp A PC called TKHost is plugged in to port 5/38, using ip address 10.10.10.137/24. Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 1: Access Lists (5

Ensurepass2013 Latest Cisco 350-001 Exam Section 1: Access Lists (5 Questions) QUESTION NO: 1 The TestKing network consists of network X and Y that are connected via Router TK1 and Router TK2. The TestKing network is shown in the following exhibit: You wish to set up an IPSec VPN between routers TK1 and TK2. Now, which of the following crypto access-lists must be configured on Router TK1 in order to send LAN to LAN traffic across the encrypted VPN tunnel? A. access-list 101 permit ip host 192.168.1.1 Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 6: RPF (5 Questions)

Ensurepass2013 Latest Cisco 350-001 Exam Section 6: RPF (5 Questions) QUESTION NO: 1 The Testking network is using multicasting for corporate video training sessions. All routers in the Testking network are enabled for IP multicast. How are these video streaming multicast packets forwarded by these routers? (Choose all that apply) A. When a multicast packet arrives at a router, the router performs a Reverse Path forwarding (RPF) check on the packet. If the RPF check succeeds, the packet is forwarded, Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 5: Rendezvous Points

Ensurepass2013 Latest Cisco 350-001 Exam Section 5: Rendezvous Points (4 Questions) QUESTION NO: 1 The TestKing network is shown in the following exhibit: ip multicast-routing interface loopback0 ip address 192.168.1.1 255.255.255.0 ip pim send-RP-announce loopback0 scope 16 group-list 1 ip pim send-RP-discovery loopback0 scope 16 access-list 1 permit 239.0.0.0 0.255.255.255 RouterTK2 is configured as follows: ip multicast-routing interface loopback 0 ip address 192.168.11.1 255.255.255.0 ip Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 4: PIM-SM Mechanics (3

Ensurepass2013 Latest Cisco 350-001 Exam Section 4: PIM-SM Mechanics (3 Questions) QUESTION NO: 1 Which of the following is used to calculate the upstream neighbor interface for a multicast route entry in a PIMv2 Sparse Mode network? A. The address of the Mapping Agent. B. The address of a directly connected member of the multicast group. C. The address of the currently active Rendezvous Point for the multicast group. D. The address of the PIM neighbor that sent the PIM Join message. E. The address Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 3: Distribution Trees (9

Ensurepass2013 Latest Cisco 350-001 Exam Section 3: Distribution Trees (9 Questions) QUESTION NO: 1 In an IP multicast network, the more sources an application has, the less frequently traffic is sent from each end. Each time a source starts to send packets, protocol operations take place and a forwarding state is established. For applications with a large number of sources, this state can time-out before the source would to only create a large number of sources, this state can time-out before sources Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 2: Addressing (7 Questions)

Ensurepass2013 Latest Cisco 350-001 Exam Section 2: Addressing (7 Questions) QUESTION NO: 1 How are Layer 3 multicast IP addresses mapped to Token Ring MAC addresses? (Choose all that apply). A. All IP Multicast addresses are mapped to broadcast MAC address FFFF.FFFF.FFFF. B. All IP Multicast addresses are mapped to network MAC address 0000.0000.0000. C. All IP Multicast addresses are mapped to Functional Address C000.0004.0000. D. In the same method as is used in Ethernet networks. E. Token ring Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 1: IGMP/CGMP (5 Questions)

Ensurepass2013 Latest Cisco 350-001 Exam Section 1: IGMP/CGMP (5 Questions) QUESTION NO: 1 Part of the Testking IP multicast network is shown below: H1, H2, H3, and rtr-a are all IGMP version 2 devices. Host 2 and Host 3 belong to the 224.1.1.1 group. After a while, H2 sends out an IGMPv2 Leave message to leave the 224.1.1.1 group. How will rtr-a react to this leave message? A. It will send an IGMPv2 Query to the all multicast hosts address 224.255.255.255. B. It will send an IGMPv2 Group Specific Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 3: Standards (4 Questions)

Ensurepass2013 Latest Cisco 350-001 Exam Section 3: Standards (4 Questions) QUESTION NO: 1 You need to make a new cable that is to be used for connecting a switch directly to another switch using Ethernet ports. What pinouts should be used for this cable? A. 1->3, 2->6, 3->1, 6->2 B. 1->1, 2->2, 3->3, 6->6, C. 1->4, 2->5, 4->1, 5->2 D. 1->5, 2->4, 4->2, 5->1 E. 1->6, 2->3, 3->2, 6->1 Answer: A Explanation: Straight through cables are used when connecting PC hosts and router Ethernet ports to switches. Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 3: Leased Line Protocols

Ensurepass2013 Latest Cisco 350-001 Exam Section 3: Leased Line Protocols (4 Questions) QUESTION NO: 1 With regard to PPPoA, which of the following statements are true? (Choose all that apply.) A. PPPoA contains information about NCP LCP and supports all AAL. B. PPPoA uses adaptation layer 5 (AAL5) as the framed protocol and is used primarily in xDSL. C. PPPoA is not a standard based protocol. D. In PPPoA architecture, IP address allocation for the subscriber CPE uses IPCP negotiation. E. PPPoA Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 2: Physical Layer (9

Ensurepass2013 Latest Cisco 350-001 Exam Section 2: Physical Layer (9 Questions) QUESTION NO: 1 You are seeing a large number of clocking problems on the serial interface of one of your routers. Which of the following would NOT cause this? (Choose all that apply.) A. Several cables connected together in a row. B. Impedance mismatching. C. Improper DSU configuration. D. Mismatching encapsulations on each end. E. Improper CSU configuration. Answer: B, D Explanation: Impedance problems would cause Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 1: Frame Relay (10

Ensurepass2013 Latest Cisco 350-001 Exam Section 1: Frame Relay (10 Questions) QUESTION NO: 1 Routers TK1, TK2, and TK3 are configured in a hub and spoke frame relay environment, with router TK1 as the hub. You have configured Router TK1, Router TK2, and Router TK3 to run IGRP over the frame relay connections. No sub-interfaces are used. You have configured a single IP subnet on all the Frame Relay interfaces. Router TK1 can reach both router TK2 and TK3, but TK2 and TK3 can not reach each other. What Read more [...]
Uncategorized

2013 Latest Cisco 350-001 Exam Section 3: Congestion Avoidance (9

Ensurepass2013 Latest Cisco 350-001 Exam Section 3: Congestion Avoidance (9 Questions) QUESTION NO: 1 You wish to enable the Resource Reservation protocol on one of the interfaces of a router. Which of the following commands will accomplish this? A. ip rsvp sender B. ip rsvp enable C. ip rsvp bandwidth D. rsvp enable E. ip rsvp reservation F. RSVP is enabled in global configuration mode, not in interface configuration mode. Answer: C Explanation: ip rsvp bandwidth is the command that enables RSVP Incorrect Read more [...]