[Free] 2018(Mar) EnsurePass Testking VMware VCPD510 Dumps with VCE and PDF 161-170

Ensurepass.com : Ensure you pass the IT Exams
2018 Mar VMware Official New Released VCPD510
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/VCPD510.html

VMware Certified Professional – Desktop

Question No: 161 – (Topic 2)

Which are the correct parameters to specify when adding an iSCSI target to an ESXi Host using the Static Discovery tab?

  1. iSCSI server ip address, port 902

  2. iSCSI server ip address, port 3260

  3. iSCSI server ip address, port 902, iSCSI target name

  4. iSCSI server ip address, port 3260, iSCSI target name

Answer: D

Question No: 162 – (Topic 2)

How can you verify vStorage APIs for Array Integration (VAAI) is enabled?

  1. quot;VAAIquot; listed on the Hard Disk properties page for any VMDK stored on a compliant array

  2. quot;Hardware Accelerationquot; listed on the Hard Disk properties page for any VMDK stored on a compliant array

  3. quot;VAAIquot; column for any datastore created on a compliant array

  4. quot;Hardware Accelerationquot; column for any datastore created on a compliant array

Answer: C

Question No: 163 – (Topic 2)

A vSphere 5 environment has an ESXi 5.x host configured to boot from a hardware independent iSCSI adapter.

What is the expected outcome if the administrator attempts to disable the iSCSI HBA in the vSphere client?

  1. The adapter will be disabled, but is re-enabled the next time the host boots up.

  2. The adapter will be disabled and the host will not boot the next time the host boots up.

  3. A hardware independent iSCSI adapter cannot be disabled from the vSphere Client.

  4. The adapter will be enabled, but the host will boot into troubleshooting mode the next time the host boots up.

Answer: C

Question No: 164 – (Topic 2)

How does a hardware FCoE Adapter appear to an ESXi host?

  1. As an uplink adapter attached to a vSphere Distributed Switch.

  2. As a hardware FCoE Adapter.

  3. As an enabled FCoE software initiator.

  4. As a Fibre Channel Adapter.

Answer: D

Question No: 165 – (Topic 2)

When PSA is coordinating the VMware NMP and any installed third-party MPPs, the MPPs perform which task?

  1. Implement logical device bandwidth sharing

  2. Handle I/O queueing to the logical devices

  3. Provide logical device and physical path I/O statistics

  4. Manage physical path claiming and unclaiming

Answer: D

Question No: 166 – (Topic 2)

An administrator decides to implement a Fixed multipathing policy for an ESXi host with four available paths to one VMFS datastore.

After the policy has been enabled for the datastore, how many paths will have an active status by default?

  1. 4

  2. 3

  3. 1

  4. 2

Answer: A

Question No: 167 – (Topic 2)

When designing a storage infrastructure to support ESXi 5 hosts what limit will be reached first?

  1. Maximum number of NFS datastores

  2. Maximum number of iSCSI LUNs

  3. Maximum number of paths to an iSCSI RDM

  4. Maximum number of iSCSI paths on a host

Answer: C

Question No: 168 – (Topic 2)

An administrator is configuring an ESXi host with two dual-port Fibre Channel (FC) HBAs. The FC storage array has four active storage processor ports. Zoning is configured on both fabrics, with ESXi HBA ports and the array ports in the same zone. There are two LUNs with VMFS datastores configured.

Using Round Robin multipathing, what is the maximum number of paths that can be used to send data to the VMFS datastores at any given time?

  1. 2

  2. 3

  3. 1

  4. 4

Answer: A

Question No: 169 – (Topic 2)

A virtual machine needs to add a 4TB disk. The storage administrator has already created and presented a 4TB LUN to the ESXi host. A 500GB VMFS5 datastore already exists on the host.

What is the next step a vSphere administrator would take to successfully provision the data disk?

  1. Create a virtual compatibility mode RDM mapping to the 4TB LUN.

  2. Create a physical compatibility mode RDM mapping to the 4TB LUN.

  3. Expand the VMFS volume to 4TB. Create a physical compatibility mode RDM mapping to the 4TB LUN.

  4. Expand the VMFS volume to 4TB. Create a virtual compatibility mode RDM mapping to the 4TB LUN.

Answer: B

Question No: 170 – (Topic 2)

When planning for an upgrade from ESX4 to ESXi5 what will be the effect of upgrading a 1TB VMFS3 datastore with a 2MB block size to VMFS5?

  1. Thick virtual disks can be expanded to a maximum of 2TB.

  2. Thick virtual disks can be expanded to a maximum of 512GB.

  3. Thin virtual disks can be expanded to a maximum of 512GB.

  4. Thin virtual disks can be expanded to a maximum of 2TB.

Answer: D

100% Ensurepass Free Download!
Download Free Demo:VCPD510 Demo PDF
100% Ensurepass Free Guaranteed!
VCPD510 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *