[Free] 2018(Aug) Ensurepass VMware VCPC550 Dumps with VCE and PDF 181-190

Ensurepass.com : Ensure you pass the IT Exams
2018 Aug VMware Official New Released VCPC550
100% Free Download! 100% Pass Guaranteed!

VMware Certified Professional – Cloud(vCloud Automation Center

Question No: 181

A vSphere administrator is administering a vSphere Distributed Switch port group using the vSphere Web Client. The port group was configured using Static binding, but the number of ports must increase as virtual machines are added to the port group.

Which port allocation setting should the administrator use to achieve this goal?

  1. Elastic

  2. Dynamic

  3. Fixed

  4. Manual

Answer: A

Question No: 182

A vSphere administrator upgrades a version 5.1.0 vSphere Distributed Switch to version 5.5.0.Another vSphere administrator, unaware of this change, tries to add an ESXi version

5.1.0 host to the switch and fails.

What is causing this addition of the ESXi host to fail?

  1. The upgraded switch supports version 5.5 ESXi hosts only.

  2. The upgraded switch must be set up for backwards compatibility.

  3. The switch failed to upgrade properly.

  4. A version 5.5 ESXi host must be added to the switch before the 5.1 host.

Answer: A

Question No: 183

An administrator is migrating 135 virtual machines from a vSphere Standard Switch to a vSphere Distributed switch. The migration reports an error and only some of the virtual machines are transferred.

What is causing the error to occur?

  1. The vSphere Distributed Switch was created with a single, default port group.

  2. The switch has become disconnected from an ESXi host.

  3. The port group on the vSphere Distributed Switch was not configured with an Elastic port binding.

  4. The virtual machine that failed to transfer did not have a network adapter.

Answer: A

Question No: 184

A network auditing team has observed activity from a virtual machine that may be an

organization policy security breach.

The vSphere administrator needs to stop network traffic from the virtual machine. Which step should the administrator take?

  1. Enable port blocking on the standard switch to which the virtual machine is connected

  2. Enable port blocking on the port group configured for the virtual machine on a standard switch

  3. Enable port blocking on the port group configured for the virtual machine on a distributed switch

  4. Enable promiscuous mode on the port group configured for the virtual machine on a distributed switch

Answer: C

Question No: 185

A vSphere administrator needs to perform packet tracing from a Linux virtual machine. The virtual machine is attached to a standard virtual switch configured with several VLANs.

Which approach could the administrator use to configure the network to capture all traffic from the Linux virtual machine?

  1. Configure the virtual switch with VLAN Trunking and specify each VLANs on the port group containing the virtual machine.

  2. Configure a distributed virtual switch with VLAN Trunking. Create a port group and configure it with promiscuous mode. Connect the virtual machine to that port group.

  3. Configure the port group containing the virtual machine for promiscuous mode.Set the port group to use VLAN 1.

  4. Configure a distributed virtual switch with VLAN Trunking.Connect the virtual machine to the switch and enable Port Mirroring on the port group containing the virtual machine.

Answer: B

Question No: 186

A virtual machine is unable to communicate with another virtual machine. Both virtual machines are connected to the Production port group on the same virtual switch and are running on the same host.

Which configuration is causing the inability of the virtual machines to communicate?

  1. LLDP was enabled instead of CDP for the vSphere Distributed Switch.

  2. Promiscuous Mode has been set to Allow on the Production port group.

  3. The Production port group is configured to use a secondary PVLAN.

  4. The speed and duplex settings for the virtual machine vmnics do NOT match.

Answer: C

Question No: 187

An administrator has configured multi-pathing using an FC array in an active-active configuration.

What is the expected behavior of the host when a failed preferred path becomes available using the Fixed path selection policy for this array type?

  1. It automatically reverts to the preferred path.

  2. It continues using the current path until it is manually reverted.

  3. It resumes load balancing across all available paths.

  4. It reverts to the preferred path after the host has been restored and rebooted.

Answer: A

Question No: 188

An administrator is planning a new vSphere deployment using shared storage. The solution must support:

->vMotion

->Storage vMotion

->Fault Tolerant virtual machines

->VAAI primitives

->RDM disks

Which storage type will meet these requirements?

  1. CIFS

  2. iSCSI

  3. NFS

  4. VSAN

Answer: B

Question No: 189

Which information can the administrator use to identify iSCSI nodes?

  1. MAC address

  2. IQN

  3. WWN

  4. LUN ID

Answer: B

Question No: 190

Which feature requires an administrator using an RDM to configure it with virtual compatibility mode?

  1. vMotion

  2. Virtual Machine Snapshots

  3. High Availability

  4. N-port ID Virtualization

Answer: B

100% Ensurepass Free Download!
VCPC550 PDF
100% Ensurepass Free Guaranteed!
VCPC550 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *