[Free] 2018(Aug) Ensurepass VMware VCAN610 Dumps with VCE and PDF 41-50

Ensurepass.com : Ensure you pass the IT Exams
2018 Aug VMware Official New Released VCAN610
100% Free Download! 100% Pass Guaranteed!

VMware Certified Associate- Network Virtualization

Question No: 41

A vSphere administrator deployed an NSX Edge Load Balancer in HA mode. What happens in the event the Load Balancer has a failure?

  1. The secondary NSX Edge Load Balancer assumes the role of primary. Existing Flows will need to have their connections reestablished.

  2. HA will start the NSX Edge Load Balancer on another ESXi host in the cluster. All existing flows will need to have their connections reestablished.

  3. HA will start the NSX Edge Load Balancer on another ESXi host in the cluster. The NSX Controller caches existing flows and hands them to the Load Balancer when it is back up.

  4. The secondary NSX Edge Load Balancer assumes the role of primary. The NSX Controller caches existing flows and hands them to the Load Balancer when it is back up.

Answer: A

Question No: 42

Which two are valid types of authentication for an OSPF area? (Choose two.)

  1. Password authentication

  2. MD5 authentication

  3. SHA1 authentication

  4. LDAP authentication

Answer: A,B

Question No: 43

Which option is VMware#39;s best practice for the deployment of NSX Manager and NSX Controller components?

  1. Deploy the NSX Manager and NSX Controller components to a management cluster.

  2. Deploy the NSX Manager component to a management cluster and the NSX Controller components to a resource cluster.

  3. Deploy the NSX Controller components to a management cluster and the NSX Manager component to a resource cluster.

  4. Deploy the NSX Manager and NSX Controller components to a resource cluster.

Answer: A

Question No: 44

Which statement is correct when upgrading vShield Data Security to NSX Data Security?

  1. NSX Data Security does not support a direct upgrade.

  2. NSX Controller must be deployed before the upgrade.

  3. The vCloud Network and Security Virtual Wires must have been upgraded.

  4. vCould Network and Security must be at least version 5.1 before starting the upgrade.

Answer: A

Question No: 45

– Exhibit –

Ensurepass 2018 PDF and VCE

– Exhibit –

This diagram details the network connectivity from an NSX network and the supporting phy sical network. Locations C and D may be required to process packets with QoS tags.

Based on the diagram, which statement details proper processing of packets if they are QoS tagged?

  1. Locations C and D will trust the QoS tags of the encapsulated frame when passing packets.

  2. Location B should trust the QoS tags of the encapsulated frames that are switched.

  3. Location A will mark the inner header of the encapsulated frame.

  4. Location B should trust the QoS tags of the external header.

Answer: D

Question No: 46

Which NSX component provides the ability to provide East-West distributed routing for virtual machines in different subnets without having to traverse the physical network?

  1. NSX vSwitch

  2. NSX Edge

  3. NSX Controller

  4. NSX Distributed Firewall

Answer: B

Question No: 47

Which is the transport protocol and port number used in VMware#39;s implementation of VXLAN in NSX for vSphere?

  1. UDP, port number 8472

  2. UDP, port number 4789

  3. TCP, port number 4789

  4. TCP, port number 8472

Answer: A

Question No: 48

After consulting with the network team, it is decided that Transport Zones will be configured with Unicast Replication Mode for a new NSX for vSphere deployment.

Which statement is true regarding the function of the VXLAN Tunnel End Points (VTEPs)?

  1. The VTEPs will send unicast frames to the NSX Controllers when the VTEPs do not have a MAC address in the MAC table.

  2. The VTEPs will switch to Multicast Replication Mode for those VTEPs to which multicast path discovery is successful.

  3. The VTEPs will send multicast frames to all other VTEPs in the Transport Zone when the VTEPs do not have a MAC address in the MAC table.

  4. The VTEPs will send unicast frames to all local VTEPs and remote proxies in the Transport Zone when the VTEPs do not have a MAC address in the MAC table.

Answer: D

Question No: 49

A vSphere administrator added a new interface to a Distributed Router with a subnet of 172.16.10.0/24 and wants to make this subnet reachable to the rest of the network. How

can the vSphere administrator achieve this?

  1. Enable OSPF on the Distributed Router. Configure the uplink interface in the Backbone area and redistribute into OSPF the 172.16.10.0/24 subnet.

  2. Enable OSPF in the Distributed Router. Configure the uplink interface in the normal area and the new interface with the subnet 172.16.10.0/24 in a Backbone area.

  3. Enable OSPF on the Distributed Router. Configure the uplink interface in the Backbone area and redistribute from OSPF the 172.16.10.0/24 subnet.

  4. Enable OSPF on the Distributed Router. Configure the uplink interface in the Backbone area and the new interface with the subnet 172.16.10.0/24 in a normal area.

Answer: D

Question No: 50

An organization requires a high performance firewall as part of an NSX deployment. What is the minimum NSX Edge Services Gateway configuration that would be suitable for the organization#39;s requirements?

  1. X-Large

  2. Quad-Large

  3. Large

  4. Compact

Answer: B

100% Ensurepass Free Download!
VCAN610 PDF
100% Ensurepass Free Guaranteed!
VCAN610 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *