[Free] 2018(Aug) Dumps4cert Cisco 400-151 Dumps with VCE and PDF Download 211-220

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Aug Cisco Official New Released 400-151
100% Free Download! 100% Pass Guaranteed!

CCIE Data Center (v2.0)

Question No: 211 – (Topic 2)

Which four statements about SNMP implementation on the Cisco Nexus 7000 Series switch are true? (Choose four.)

  1. Cisco NX-OS supports one instance of the SNMP per virtual device context.

  2. By default, Cisco NX-OS uses the default VDC for SNMP.

  3. SNMP supports multiple MIB module instances and maps them to logical network entities.

  4. SNMP is VRF aware. You can configure SNMP to use a particular VRF to reach the SNMP

    notification host receiver.

  5. Only SNMP version 3 is supported on NX-OS.

  6. Cisco NX-OS supports one instance of the SNMP per switch.

  7. Each VDC can have multiple SNMP sessions configured in it.

Answer: A,B,C,D

Question No: 212 – (Topic 2)

Refer to the exhibit,

Dumps4Cert 2018 PDF and VCE

which two statements about spanning tree are true? (Choose two)

  1. BPDUs from a vPC are processed on this switch

  2. BPDUs are processed and generated by both peer switches.

  3. This switch cannot generate BPDUs for a vPC.

  4. BPDUs are sent to the peer switch for processing.

  5. BPDUs received on this switch are dropped because of Type 2 inconsistency issues.

  6. This switch generates BPDUs for vPC. Answer: C,D

Question No: 213 – (Topic 2)

Refer to the exhibit.

Dumps4Cert 2018 PDF and VCE

Which command on a Cisco UCS provides this output?

  1. show npv info

  2. show npv external-Interface-usage

  3. show npv status

  4. show npv traffic-map

Answer: C

Question No: 214 – (Topic 2)

Refer to the exhibit.

Dumps4Cert 2018 PDF and VCE

vPC is configured between which switches?

  1. Switch-ID 13 and Switch-ID 23

  2. Switch-ID 11 and Switch-ID 12

  3. Switch-ID 100 only

  4. Switch-ID 13 and Switch-ID 100

Answer: A

Question No: 215 – (Topic 2)

Which two options are valid span configuration for a cisco Nexus 1000 series? (choose two)

Dumps4Cert 2018 PDF and VCE

  1. Option A

  2. Option B

  3. Option C

  4. Option D

  5. Option E

Answer: D,E

Question No: 216 – (Topic 2)

Refer to the exhibit.

Dumps4Cert 2018 PDF and VCE

Which two reasons explain why vPC peer-switch is not working? (Choose two)

  1. vPC peers are not the root of spanning tree topology.

  2. The peer keep alive link is down.

  3. Cisco Discovery Protocol is not configured.

  4. The feature is not enabled on the vPC peer.

  5. Loop Guard is disabled. Answer: B,D

Question No: 217 – (Topic 2)

Which three LSA types are valid for OSPFv2? (Choose 3)

  1. Opaque LSA: an LSA used to extend OSPF.

  2. Default LSA: an LSA generated by the ASBR. These LSAs are used to propagate default route into OSPF.

  3. Backbone Summary: an LSA sent by the backbone router to all the OSPF areas.

  4. Network LSA: an LSA sent by the DR. This LSA lists all routers in the multi-access network.

  5. AS Internal LSA: an LSA generated by the ASBR. AS Internal LSAs are flooded only

    within the autonomous system.

  6. Router LSA: an LSA sent by every router. This LSA includes the state and the cost of all links and a list of

    all OSPFv2 neighbors on the link.

  7. DR Summary LSA: an LSA sent by the DR router to all the other routers on network.

Answer: A,D,F

Question No: 218 – (Topic 2)

Refer to exhibit.

Dumps4Cert 2018 PDF and VCE

ABC Company recently implemented the network load balancing solution across distributed data centers. It does not work as expected.

Which option is possible solution to address the issue?

  1. Enable selective unknown unicast flooding.

  2. Add static ARP entry on Cisco Nexus for both load balancers.

  3. Add a new OTV broadcast group

  4. Use a dedicated VLAN for network load balancer. Answer: A

Question No: 219 – (Topic 2)

After configuring FabricPath, the following message appears in the syslog:

%STP-2-L2GW_BACKBONE_BLOCK: L2 Gateway Backbone port inconsistency blocking

port port-channel100 on VLAN0010.

What is a possible reason for this message?

  1. Spanning tree must be disabled, and the message indicates that STP is enabled.

  2. STP is misconfigured. The root guard must be disabled.

  3. An inferior BPDU was received on a Cisco FabricPath edge port.

  4. A superior BPDU was received on a Cisco FabricPath edge port.

Answer: D

Question No: 220 DRAG DROP – (Topic 2)

Drag and drop feature on the left onto the appropriate business benefits on the right.

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Explanation:

ETS

Data Center Bridging Exchange (DCBX) Protocol Fiber Channel over Ethernet (FCoE.

PFC

Ref:Cisco White Paper Data Center Bridging

100% Dumps4cert Free Download!
400-151 PDF
100% Dumps4cert Pass Guaranteed!
400-151 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *